Tractors Agriculture Implements Rear Blade
1. Mounting construction: Category 1, three-point linkage entirely steel frame,
Reversible high carbon steel cutting edge.
2. Blade Angle: Adjustable 0 to 70 in two increments to either side
And similarly with blade facing rearward.
3. Blade pitch: Adjustable from 0 to 40
4. Blade Width: 7 ft.
5. Overall length 5 ft. (with grader wheel)
6. Weight 170 KG.
7. Accessories: Grader wheel kit;
8. Tractor Compatibility: 35-85 hp.
Land Leveling, yard cleaning, farm road grading, snow clearing, ditching and terracing, back lifting, earth moving: these are some of the many jobs that you can do with this versatile tool. With the grader wheel installed, hydraulic position control holds the blade at the chosen depth for the fine leveling, angle and pitch of blade are also adjustable from tractor seat. Blade pitch of blade is adjustable from 0 to 40 by the screw lever in reach of the tractor seat. The blade can be completely reversed for back filling. For Access to Awkward places it can be offset to either side. An alternative hitch pin for the right and lower link allows the blade to be tilted for digging ditches or irrigation channels.
Sales Terms & Specifications:
|Model No.||Tractors Agriculture implements REAR BLA|
|Price Terms||FOB / CIF / EXW(Factory Price)|
|Terms Of Payment||T/T, Western Union, PayPal, L/C at sight|
100% biodegraded Agriculture cover + biodegradable product + non-toxic + decompose in landfill Certificated by * international s
PICK HEAD P401 P402 P403 P404 P405
Mini roll baler: 1) MRB0850 mini roll baler specifications: a) Model: MRB0850 b) Bale size (L x W): 50 x 70cm c) Pi
Machine has a 3 blade,72" heavy guage steel deck. Not much else to tell, other than this one will not last. As always we reserv
The cutting bar had been studied and manufactured to give the maximum of advantage and good profit from the quality of harvest g
Volvo 39 ton tractor head Volvo 39 ton tractor head, 8 units - Model: WG42 year 1990 - Drive system: 4x2 - Engine: Cummins-LTA10
TS 554 is designed on the basis of KM sysytem,the chasis is same as the KM 554,butalso there's some defference,please contact w
Application Marina hammer mills are primarily used for grinding thrashed maize or maize with cobs and straw, cereal husk and any
As a key equipment in the production of pellet feed, this machine was awarded the title of top-quality product of the former Min
These machines are used for cereals crops on rows as: Wheat, barley, out, rice, or sowing teh vegetables, fodder and herb seeds.
The irrigation system can supply the necessary moisture to your plants. Various nozzlesare optional for different requirement
Available with 16, 18, 20 and 22 discs. Standard steel disc size we use in our discharrowsis 460x3,5mm. In our discharrows we us