Suniso Refrigeration Oils

SUNISO GS Oils are premium quality oils expressly designed for use as refrigeration
compressor lubricants.

SUNISO GS Oils are miscible well with HCFC and CFC refrigerants such as R-22, R-502
and R-12 while featuring excellent stability and giving long trouble-free service
life in the refrigeration systems using above refrigerants. In addition, SUNISO
GS Oils also perform excellently with natural refrigerants such as R-717, R-600a
and R-290.
SUNISO GS Oils are refined from specially selected naphthenic crude oils by special
method assuring excellent lubricity and other properties.
SUNISO GS Oils are approved by all major air-conditioner, refrigerator, freezer,
car air-conditioner manufacturers in the world.

Chemical Stability

To resist chemical reaction with the refrigerant or other material normally present
in the system.
Thermal Stability

To eliminate excessive carbon deposits at compressor hot spots such as valves or
discharge ports.
Low Wax Content

To prevent separation of flocculant wax from the oil-refrigerant mixture at the low
temperature points in the system.
Low Pour Point

To prevent separated oil from congealing in refrigerant lines.
High Dielectric Strength

To insure good insulating properties. In hermetic units, the oil-refrigerant mixture
serves as an insulator between the motor and the compressor body.
Proper Viscosity

Even when diluted with refrigerant so as to insure high film strength at elevated
operating temperatures and while providing good fluidity under coldest operating
conditions.
No Contamination

To prevent scarring of bearing surfaces, plugging of lines or oil ports and general
deterioration.

Sales Terms & Specifications:

Model No.Suniso 3GS, 4GS, 5GS, 6GS, 331
Place Of OriginJapan
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, Western Union, PayPal, L/C at sight
send enquiry to this suppliers

Relative Products

Condenser Unit

Condenser UnitCommercial and industrial condenser unit for cold room

Heat Exchanger

Heat ExchangerZJ/1061D: Conventional type of environment-friendly air draught heat exchanger. Adopts technology without plumbum, with high eff

Evaporator

EvaporatorWe produce industrial evaporator with good quality. TEN can be used in all the refrigerant without Ammonia. TAN can be used in

Compressor

CompressorMain Products: low & medium back pressure hermetic refrigerating compressors. Products Characteristics: low operating noise, low

Honeycomb Monoliths for RTO

Honeycomb Monoliths for RTOIn order to eliminate the volatile organic compounds (VOC) from the waste gases, honeycomb monoliths are lined inside regenerati

Shelled Titanium Tube Heat Exchanger (Single Circle Series)

Shelled Titanium Tube Heat Exchanger (Single Circle Series)1) Cooling capacity: 11,000-55,000BTU/h 2) Heating capacity: 13,000-60,000BTU/h 3) Water flow: 0.65-2.8cbm/h 4) Corrosion resist

Oil Cooler

Oil CoolerMaterial: aluminum Type: plate fin,bar-plate Size: can be customer-tailed OEM: available Packing: according to clients' specific

High Frequency Induction Heating Generator

High Frequency Induction Heating GeneratorModel Input power Input voltage Oscillatory frequencyGGC100 100KW 380v 50hz 20-50KHzGGC120 120KW 380v 50hz 20-50KHzGGC150 150KW

Counter-Current Regeneration Sodion Exchanger

Counter-Current Regeneration Sodion ExchangerThe sodio exchanger is used to intenerate the feeding water. The calcium ion andmagnesium ion in water will be replaced by sodi

Plate Heat Exchanger

Plate Heat ExchangerWe can supply plate heat exchangers.

filter drier

filter drierThis machine uses 80% 3A molecular sieve core and 20% active aluminum inside, itis a perfect core mixture for the equipment syst

Industrial Fan Heater

Industrial Fan HeaterFeatures:1) Power: 9,000W, 400V2) Four setting: 55W high speed, 4,500W low speed, 9,000W low speed and 9,000W high speed3) Se