Rth 400 Automatic Hydraulic Honing Machine

This main body is made of thick sheet-iron and platinum-plate and slides of cast-iron and cast-steel. Operation is vibration-free. The transmission moves up and down automatically. Rotation of the spindle is of two different turn. The ascending and descending speed of the spindle could be reduced down to zero. The required spiral adjustment is available. The head-stock is locked magnetically to avois from spoiling the spiral-design lines during the honing operation. Even in honing operation, the head-stock performs automatic switch onand off. When required, it works intermittently at frequent intervals. The machine has a hydraulic operation mode, which achieves a quiet and speedy functioning.

Kod no rth 400 technical specifications
logitudinal traverse of honing unit 700 mm
max. Bore diameter 300 o
min. Bore diameter 30 o
max. Stroke 400 mm
distance between table and spendle min.370-max.1200 mm
spindle soeeds-2 65-130 R. P. M.
spindle stroke rate stepless variable stepless(0.15mt/min)
table size 600 mm. X 1400 mm.
distance table motion 1000 mm.
main motor(3. Phase a. C. ) 1.5 kw
hydrolic power unit motor 2 kw
hydrolic power unit motor 0.9 kw
transmission mechanism motor 0.75 kw

height 1750 mm
width 2300 mm

lenght 1350 mm
without packing 1050 KG

with packing 1150 KG

Sales Terms & Specifications:

Model No.rth 400
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentL/C,T/T
send enquiry to this suppliers

Relative Products

tire changer

tire changerYLT-702 Technical Data Rim clamping Outside 11''-20'' Rim clamping Inside 13''-24'' Wheel Width

Programming Device

Programming DeviceNEC Programmer NEC Programmer NEC Programmer NEC Programmer NEC Programmer

Tool Hanging Board

Tool Hanging BoardFeatures: 1) Five groups of hanging boards, simple and practical design 2) Super big capacity to hold and display tools 3) Hangi

Universal Dash Programmer

Universal Dash ProgrammerFeaturesUniversal Dash Programmer is the most sold programming-device for digital speedometers worldwide. The system is a high-q

Auto Parts

Auto PartsWe can supply a wide range of specifications.

Automatic Tyre Inflator

Automatic Tyre Inflator1) Digital Display of desired and actual pressure 2)Increase/Decrease key on front panel for setting pressure 3)Auto cut off on

Hydraulic Forklift Jack

Hydraulic Forklift JackFeatures: 1) Compact structure and convenient operation 2) A versatile jack has a high enough profile as normal jacks and a low

Motor Cycle Lifter

Motor Cycle LifterOur product as following; 1. Hyd. Handing equipment as hand pallet truck, stacker, hyd. Drum carrier truck, hyd. Drum lift, x-l

auto lift,post lift,hydraulic lift,car lift,parking lift

auto lift,post lift,hydraulic lift,car lift,parking liftTPO310AC: Features: 1) True asymmetrical design 2) 30 degree rotated columns 3) Maximum door opening for improved access 4)

transmission jack

transmission jackTRANSMISSION JACK ranted load(TON):0.5 MIN. height(mm):853-1300 MAX. height(mm):1340-1970 SHOP CRANE capacity(TON):0.5-2 lifting

8T Hydraulic Bottle Jack

8T Hydraulic Bottle JackSpecifications:1) Capacity: 8T2) Min. height: 200mm3) Lifting height: 125mm4) Adjusting height: 70mm Packing:4pcs/ctnPackage siz

Car Eagle A800

Car Eagle A800Eagle OBD-A800 Car Eagle OBD-A800 Main Features: 1. Read VW / Audi Generic and Manufacturer specific Diagnostic Trouble Codes.