Home > Product Catalogue > Chemicals > Others

LITHIUM EP (EXTREME PRESSURE) LUBRICATING GREASE FOR PLASTIC INJECTION MACHINE, SLIDE WAY, CHASSIS LUBRICATION FOR TRUCKS & BUSES, CENTRAL LUBRICATION SYSTEM AND CLOSE GEAR BOX
Product description:
High performance general-purpose industrial-type grease. This lithium hydroxystearate based grease is formulated to provide extra protection against wear, rusting and water washout. It is NLGI Grade 0 with a paraffin base oil viscosity of ISO VG 180-200 and it is fortified with rust and oxidation inhibitors. It has been designed to meet the multi-purpose needs of the end user.
Recommended for most types of marine and industrial applications including heavy-duty applications where high unit pressures or shock loads are present. This grease provides excellent protection against rust and corrosion and resists water wash-out which makes it particularly suitable for equipment where moist or wet conditions are common. The recommended operating temperature range is from-20C to 130C, but it may be used at higher temperatures if the lubrication frequency is increased accordingly.
Key features and benefits are as follow:
(1) Very good resistance to heat, oxidation and structural degradation
(2) Excellent resistance to water spray off and washout
(3) Excellent resistance against rust and corrosion
(4) Very good anti-wear (AW) and EP performance
(5) Broad usage
Applications:
Recommended for all purpose use in normal to heavy-duty, marine applications, including the lubrication of anti-friction and plain bearings, bushings and pins under normal operating conditions. It is particularly recommended where loads are high; shock loads are present, or where severe vibration is a problem. It is capable of lubricating bearings at ambient temperatures ranging from-20C to 130C. For continuous service at temperatures above 95C, proper purging and re-lubrication frequencies are critical for maintenance of correct bearing protection.
The good water tolerance and rust and corrosion protection make it particularly suited for wet applications commonly found in marine environments. Compatible with most grease, particularly those made with lithium soap. Mixing of greases of different soap types, however, should check with grease supplier. When replacing grease, the previous grease should be completely flushed from the system.
(1) Plastic Injection Machine (to lubricate toggle, pin and bush system)
(2) Machine Slide way
(3) Chassis Lubrication for tuck and buses
(4) Industrial Central Lubrication System / Manual Hand Pump
(5) Industrial Gear Box (replace gear oil in leakage gear box)
Based on unleaded extreme-pressure formulation but it is not recommended for human or animal food processing or handling where contamination of the food could result.
Typical physical properties:
NLGI Grade: 0 (Zero grade)
Soap Type: Lithium
Soap: 4-6%
Color: Amber
Texture: Smooth
Penetration ASTM D-217
Worked 60 Strokes: 355-385
Worked 100, 000 Strokes: + 10%
Dropping Point, Min, ASTM D-2265: 350F (176C)
Corrosion Test, ASTM D-1743: Pass
Oxidation Stability, ASTM D-942: (100 Hour, psi drop) Max: 5
Timken OK Load, Min, ASTM D-2509: 50
Four Ball EP, Weld Point, ASTM D-2596: 250kg
Four Ball Wear (Typical Scar, mm) , ASTM D-2266: 0. 4mm
Water Washout, 175F Max, ASTM D-1264: 10%
Working temperature: -20C to 130C
Mineral Oil, ASTM D-445
Viscosity @ 212F: 85SUS
Viscosity @ 100C: 17cst
Viscosity @ 100F: 1000SUS
Viscosity @ 40C: 180-200cst
Viscosity Index: Minimum 80
Pour Point, ASTM D-97: -4F (-20C)
Available in 16kg pails and 181kg drums.