Mileage Correction Kits

Mileage Correction Kits
TachoPro (OBD2 ISO9141 Interface + TachoPro dongle integrated)
This compact interface will allow you to easily read / write / modify the mileage / km on your car without the need to remove the dash. It connects to the on-board diagnostics port located in your car.
This kit will also allow you to use it as a diagnostic ISO9141 compatible interface. (See OBD2 diagnostic cable specification for details)
This tool is used daily by engineers all over the world and is very effective. The software is DOS based and in german, but very easy to use.
A laptop or PC is required, note that on very fast ones over 233 MHz the software might not work.
- Interface is based on certified ISO9141 Bus Transceivers and RS232 level shifters
- K-Line & L-Line (K / L Interface)
- Bi-Colour status LED`s for K-Line & L-Line
- Power LED
- Powered from car battery over service cable
- Service cables for BMW, Mercedes Benz and Volkswagen included
- Comfortable service cable length of 2, 00 metres
Other Information:
1. The TachoPro software might not work on PC`s that are faster than 233 MHz 2. Interface electronic of the Tachopro & K / L is the same, only tachoPro have the dongle inside so the tachopro software is possible to run and manipulate the mileage
3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell
4. Scantool, scanmaster, digimoto are using another interface based on ELM interpreter chips and are not compatible to this interface (Of this ELM interpreter chips exist 3 pieces with different protocols)
5. For further dashboard problem, check pls. From what manufacturer your combi instrument is made, VDO (Siemens) , Motometer or Magneti. The Tachopro can only work for Polo on the one made from Motometer
6. Tachopro supports cars up to 1999 sometimes to 2001 (from model to model)

Sales Terms & Specifications:

Model No.498
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, Western Union, PayPal, L/C at sight
send enquiry to this suppliers

Relative Products


Professional  TROUBLE CODE READER OBD 2 II for VW AUDIobd_2: OBD 2,The new generation of automotive code readers that support controller area network(CAN) protocol has arrived. The n

USB KKL VAG-COM for 409.1

USB KKL VAG-COM for 409.1COM KKL VAG-COM for 409.1: this diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol. Workable model: This

Roller Stool

Roller Stool1) Capacity: 300lbs / 136kg 2) Cylinder style: HXSKQ-100 3) Diameter of seat: 330mm 4) Min. seat height: 400mm 5) Max. seat heig

Auto polisher/waxer

Auto polisher/waxervoltage:120v/230v frequency:60/50HZ rated rotate speed:2580 current:1AMP powe:110W

Double-level platform scissor lift suitable for four wheel alignment

Double-level platform scissor lift suitable for four wheel alignmentSpecifications:Load Capacity:3.5TonsPower Supply:380V/50HZHorse Power:4HPPower:2.2kwMax Lifting Height:2000mmSecondary Jack lift

Spray Booth

Spray BoothFeatures: 1) For large-sized car painting and baking 2) Maintains a high level of safety and performance with quality

Auto Immo Reader >> Tms370 Programmer

Auto Immo Reader >> Tms370 ProgrammerTMS370 Programmer Information Introduction: The TMS370 is the best low cost programmer for TI TMS Microcontroller development,

Auto Storage Battery Detecter

Auto Storage Battery DetecterUse: Fast and accurate test the health status of the auto storage battery, applicable for automobile assembly, auto maintenance

Quixx Scratch Remover

Quixx Scratch RemoverScratch remover for paint finishes car paint finishes Unattractive scratches in the paintwork of cars are unavoidable over time.

Kwp2000 + Obdii Chip Tuning

Kwp2000 + Obdii Chip TuningKWP2000 permits the reading and writing of flash eprom at the internal ECU through the diagnosis taken by OBD. Family of progra

Lubrificant Lapping Paste

Lubrificant Lapping PasteThe main difference between resurs and remetall is the following: Resurs not only restores metal but also forms a porous structu