DD706 Single-Phase Mechanical Meter
DD706 single phase type meter is used to measure electric power in single-phase 50Hz or 60Hz AC circuit. It should be fixed to use with the limited working temperature of -30~+55°C. The relative humidity should not exceed 95% and without the corrosive 
Clamp Meter
Key Specifications/Special Features:
*Display: 3-3/4 digital LCD, 4000 count
*Autoranging
*Auto power off
*High speed bargraph
*Measuring range 400A, 600V
*With 0.01A, 0.1V high resolution
*Data hold function
*Touch zero function
*Jaw opening diameter 2Multi Power Meter
Multi Power Meter designed to be installed in monitoring and
control panels in industrial field.
Made with Microprocessor technology, this Multi Power Meter allows the operator to
monitor for 16 kinds of parameters at once and to do the programming of inpuBATTERY TESTER
TESTING RANGE:1.5V BUTTON CELL, AAA, AA, C, D, 9VType DTSY495 Three-Phase Prepaid Meter
DTSY495 series three phase electronic type prepayment watt-hour meter is a kind of
new-style meter which is developed by our company on the basis of type DDSY495
single phase electronic prepayment watt-hour meter and adopt micro-electronics
techniques. It 3-phase Electronic 4-q Energy Meter Quadro+
Four-quadrant meters for industry and utilities.
Full 4-quadrant metering of electrical energy, cl.0,5s;
Direct connected or transformer operated;
Load range:20(120)a or 1(2)a,5(10)a;
Up to 8 tariffs,16 seasons;
Up to 16 channels of user selectable daVoltage Testers
We can supply voltage testers.
Packing:
Export packageSingle Phase and Three Phase Watt Hour Meter (Energy Meter, Ammeter )
Application:
Single phase and three phase watt-hour meter is applicable to measure the rated frequency
50Hz and power loss in electrified wire netting. The meter has novel design,
rational structure and features of high overload, low power loss and long
lDigital Clamp Meter
Detailed Selling Lead Description
Features:
1) 3-1/2 digit LCD with a max. reading of 1,999
2) Data-hold function
3) Low battery indication
4) Overload protection
5) Temperature measurement
Specifications:
1) Test range and accuracy:
a) DC voltageEnergy Usage Meter
(1). BackgroundThe energy usage monitor uses SOC technology (Only one chip which finish ADC, MCU and LCD Driver functions). It displays Volts, Amps, Watts, Hz, VA, Time. It can be widely used in the field such as power quality checking, Cumulative KillowatDigital Voltage Tester
*AC/DC Voltage Tester;
*Testing Range:12,36,55,110 to 220V;
*Neon Lamp Indicator and LCD Digital readout;
*No batteries inside;
*Easy, safe, quick, accurate;
*Compact "pen" size;
*Inductance Break-point for continuity check.Multimeter
Professional Multimeterkilo watt hour meter
Application: DTSF577 series three phase electronic mul- tirate watt-hour meter is a kind of new- style meter, it can measure user electric energy consumption by use-of time. Its te- chnical performance are completely conf- ormed to the stipulated requiremedigital multimeter
FunctionRangeAccuracyDC Voltage200mV-1000V±(0.5%+1dgt)AC Voltage200mV-750V±(0.8%+3dgt)DC Current20µA-20A±(0.8%+1dgt)AC Current20µA-20A±(1.0%+3dgt)Resistance200Ω-200MΩ±(0.8%+1dgt)Diode TestYesTransiPanel Meter
Features:
1) Specifications:
a) Construction: panel mounting, connection backside
b) Housing material: flame-resistant resin
c) Isolation: between power supply / input / output
d) Installation
e) Operating temperature: -20 - 55°Digitel Multimeters
Digital Multimeters M-1000:)Function RangeDC Voltage 200mV-1000VAC Voltage 2V-750VDC Current 200uA-20AAC Current 2mA-20AResistance 200ohm-20MohmCapacitance 2nF-20uFFrequency 20KHzDiode Test YesTransistor Test YesContinuity Buzzer Yes ;Auto Power Off Yes ;DFiber Cleaver
Our business are not only covering laser source, optical power meter, otdr, fusion splicers and fiber cleaver, but also fiber communication and wireless commmunication in our solutions.digital multimeter
Features:3 1/2 digits LCD, Max reading 1999Low Battery IndicationOverload ProtectionBattery Check FunctionSpecifications:Voltage DC: 200mV/2000mV/20V/200V/600VVoltage AC: 200/600VCurrent DC: 2000uA/20mA/200mA/10AResistance:200/2000/20k/200k/2000kΩDioThree Phase Din Rail Watthour Meter
Application:
Type SY1041 three phase DIN rail watt-hour meter is a kind of new style three phase electronic multi-rate watt-hour meter, energy data display adopt 7 digits wide temperature type crystal display, with many functions of multi-rate (time-of usMultimeter
Technical specifications:
1) DCV: 1,000V ± 0.5%
2) ACV: 200-750V ± 1.2%
3) ACA: 200-1,000A ± 2.5%
4) OHM: 200-20KΩ
5) Insulation test: (with DT261): 20M-2,000MΩ
6) Battery: popular 9V x 1
7) Dimensions: 230 x 70 x 37mm1 2 3 4 5 6 7 8 9 10 Next...
First Last
Total: 1051 items in 53 pages.