CNC Shearing Machine

Features: 1) QC11K-12 x 6000 CNC shearing machine 2) DNC61G CUT controller 3) SIMENS electronic components 4) BOSH hydraulic valve 5) 9CrSi blade 6) Foot pedal

HSS straight shank twist drill

DETAILED PRODUCT SPECIFICATION: HSS STRAIGHT SHANK TWIST DRILL HSS END MILL HSS TAPER SHANK TWIST DRILL HSS TAPS Spec. for HSS STRAIGHT SHANK TWIST DRILL 1)Production technics: Roll forged/Roll & Polished/Fully Ground/Milled 　 　 2)Standard: D

Belt Grinder

Voltage: 230V ~ 50Hz Input power: 520W No-load speed: 2,950rpm, 134rpm Wheel size: Ø 200 x 32 x Ø 32mm NW/GW (kg): 30.5 / 32.5 Package size: 590 x 500 x 310cm Loading amount: 320 pcs/20-foot

Hydraulic Press Machine For Forging

Now we are manufacturing large scale of forging parts and aluminum forging parts for motorcycle and automobile parts. They include: shifting fork, start pedal rod, rocking arm, connecting rod, brace, crankshaft, vibration absorber rocking arm, finish forge

Drilling and Milling Machine

Drilling and milling machines.

F-14 Magnetic Base Indicatior holders

Full magnetic base,Non-magnetic stainless steel holding rod,set in hardened universal ball socket.Fine precision adjustment controlled by thumb screw allowing minute adjustments, Hammered blue base finish....other parts are chrome plated or stainless steel

Duplex Surface Grinder

We are manufacture: Duplex surface grinder 100 mm capacity. Coolent magnetic seperator. Oil skimmer Dial comparator stand. Super finishing machine for all types of bearings and other machine parts. Hydraulic grease filling machine. Paper band filter machin

SEMI-UNIVERSAL DIVIDING HEAD

1.Semi-universal dividing head is one of the most important attachment for millingmachine. With th help of this dividing head,the workpiece held can be carried out directindexing and simple indexing,or rotate to any angles as desired and the peripheryof

Man-Made Briquette Making Equipment

Features: 1) Shaker 2) Flash dryer 3) Briquettor 4) Smoke collector 5) Carbonizing system 6) Pipeline parts 7) Central electrical controller

Corner Assembling Machine

WOODEN CORNER ASSEMBLING MACHINE Long lasting electrostatic paint Safety switch depending on arm movement Mitre system providing centering Engine power:850 watt 2.5 amp Engine cycle: Max 32000 r. P. M Blade size:8 mm Pincers size:6mm Weight:10 kg

H-Beam Hydraulic Flange Straightening Machine

H beam hydraulic straightening machine is applicable to straighten thicker H-type steel wing plates. It has a large scope of applications and powerful working capacity. There are hydraulic drift rollers in the front and back of the main machine.

Milling and Drilling Tables

1)Structural members are of fine-grain cast iron 2)All lead screws are 1/2"*10"Acme thread. 3)Easy to read,easy to set dials are calibrated in thousandths of an inch 4)T-slots are 5/8" wide by 7/16"deep with an undercut to provide for T-nut hold downfor f

SHXW165 Universal Wheel Dresser

Height of center: 165mm Measuring quasi-pin dia.: 10mm Max. swing distance cutter: ±20mm Max. wheel diameter: 200mm Max. size of arc that may be dressed is ±40mm Reading accuracy of swivel slide: 5" Max. translation of feed: 20mm Feel per

CNC Ultra-High Pressure Waterjet

The CNC Ultra-High Pressure Waterjet consists of three parts: Ultra-High Pressure Intensifier Pump, CNC Cutting Table and CNC Controller. Ultra-High Pressure Intensifier Pump includes Low Pressure Water System, Driving System and Intensifier System. Low Pr

Oil Cylinder

Compatible models:1) Caterpillar: E110B, E180, E200B, E240 (MS180), E300B, E311, E320, E330, D3C, D4D, D5, D5B, D5D, D6C, D6D, D6H, D7G, D8K 2) Daewoo: DH220, DH280, R200, R210, S55-V, S2803) Hitachi: EX40, EX60, EX-100, EX100M, EX120, EX150, EX200-1-2-3,

CNC Engraving Machine

- FEATURES 1. Cost effective in motion control application of up to 3 axes Motion control of up to 3 axes is ccomplished under PC environment familar to most users, which is based on numerical control technology. 2. Simple in connectivity A single com

COLLET CHUCK SET ER16

Shank R8. Collets 8 Collets: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm

Morse Taper Holder

This holder is used for Morse taper shank tools (drills, reamers and mills).

Machine shield

The shell is made of stainless steel or cold rolled shell plate ,of which the surfaceis anticorrosion treated .The internal parts are made of heat freated steelband, this product is of compact design and noise free,long travel range and especiallysuitnble

Thread Rolling Dies

Mptpl manufactures thread rolling dies(flat & circular) for precision & production thread rolling of fasteners/components. Dies are made from selected grade of tools steel which is carefully machined & heatreated. Threads are imparted on world class thread

1 2 3 4 5 6 7 8 9 10 Next...
First  Last
Total: 325 items in 17 pages.