To get the best result from silage the maize harvester has to chop stems and cobs perfectly. Maize harvester's feeding system is designed to feed the flywheel at right angles for the best quality silage. The flywheel is equipped with 10 specially hardened knives revolving at nearly 1600 rpm. There are two feeder drums and two pressure rollers that control the feeding of the maize to the flywheel. One of the pressure rollers is spring loaded and toothed; the other one is not. The pressure rollers are vertically mounted right behind the feeder drums so that stems and cobs are always chopped at right angles. This is the secret of the machine's low power requirement and short length of chop.
For the protection of the feeding system an easily accessible shear bolt is mounted on the machine. It protects the feeding system against the intake of earth and stones in bad conditions.
While in operation, height adjustable wheel maintain an even working height thus preventing the intake of earth and stones in bad conditions.
The MS-1 is driven by a pto shaft with an overrun clutch and through maintenance free V-belts. A manual V-belt tightener is mounted on the machine. The feed unit is powered by a transmission running in an enclosed grease bath; totally maintenance free.
Knife grinding is easily carried out with the built-in sharpening device.
The chute is rotated by a hydraulic cylinder. A manual remote control adjusts the deflector. Both controls can be adjusted from the driver's seat.
The height of the machine can be reduced by folding down the upper part of the chute. Also two row version is available.
Sales Terms & Specifications:
|Price Terms||FOB / CIF / EXW(Factory Price)|
|Terms Of Payment||T/T, Western Union, PayPal, L/C at sight|
Working Principle: The controller can calculate the current target temperature according the four different time period a day an
EngineType800cc, 4-stroke, liquid cooled, SOHC in-lineBore & Stroke62x68mmStarting SystemElectricIgnitionMp group in-turn EF
We can supply all kinds of outer hose assy as the spare parts of brush cutter. 780mm Tanaka SUM328 895mm Kaaz VRS301
Stub Axles:The 1 through 15 ton Stub Axle Wheel Assembly includes the following:1 - Wheel2 - Axle boxes-high-grade cast ir
Captian Mini Tractor is very fuel efficient tractor, Powerful hydraulic, All work of farming can be done through this small trac
We have a lot of units of ford tractors (Ford 5000, Ford 6600, Ford 7600)We have a large assortment of changing tools too.
It is suitable for planting wheat, millet, sorghum, etc. 2BFT Type can fertilize while planting. It can perform drilling, fertil
Engine model: 1E34FEngine type: air-cooled, 2-strokeDisplacement: 25.4cc2-cycle oil/gasoline mixing ratio: 1:25Ignition: CDIPowe
Captian Mini (Small) Tractor is most fuel efficient tractor, Light weight powerful diesel engine of 11. 8 hp single cylinder wit
Post hole digger Packing: 6pcs/bundle, then into PP woven bag With wooden handle or with fibreglass handle 3mm thickness Qty: 2
Belarus four-wheel tractors are fitted with: 1) Four-furrow plough 2) Disk plough 3) Power driven disk plough 4) Rototilling in
The Solcor lightweight Net Clip Gun weighs approximately 400 grams and is capable of clipping together both sides of the vineyar