Materal such as: 20#, 45#, Q345, etc
We at Steminc can develop piezoelectric ceramic powder formulations to meet the requirement for different kinds of Piezo electric devices.
Here is some of the products we manufacture:
Piezoelectric ceramic powder,
Piezoelectric ceramics,
Single layer pi
Detail description, please look it up on our website.
Rollerdrive can be controlled by a PC/plc via a devicenet interface that is available using our four zone accumulation controller, the zpa +4. The zpa +4 provides the opportunity of designing very intelligent and sophisticated conveyor systems with a varie
machine tool housing
InstaZorb absorbent is an all natural, sound solution that enhances safety in the workplace and is not hazardous to the environment.
Features
* Non Selective Absorbent
--Will absorb any liquid of any viscosity.
* High Absorbency
--4.5 times the absorbing
Metal Channel Strip Brush 72" (1829mm) x 1.187" (30.15mm) filled with Polypropylene filaments. We stock many sizes of the brush which is used as a seal around doors. This brush will provide a barier to fill gaps in overhead and sliding doors, as well as ar
We at steminc can develop piezoelectric ceramic powder formulations to meet the requirement for different kinds of piezo electric devices.
Here is some of the products we manufacture:
Piezoelectric ceramic powder,
Piezoelectric ceramics,
Single layer piezo
Standart and control set number 6 or number 10 for window blind head rail.
Intensive quality control is set to acheive customer's satisfaction. We have a range of accessories to meet your factory automation needs. Feel free to contact us now for any enquiry.
We sell high pressure gas cylinder
5, 10, 20, 40 , 50 ,67 liters working pressure 150, 200, 230 bar
please visite our web site.
Intensive quality control is set to acheive customer's satisfaction. We have a range of accessories to meet your factory automation needs. Feel free to contact us now for any enquiry.
To make corrugated sheet, Trapezoidal Sheet, Square Rib Sheet of any coated or uncoated sheet of any length. The sheet thickness is 0.35mm. to 0.7mm. or as per requirement.
Inside Disk brushes available. Stock and custom sizes available. Many fill materials and metal channel sizes.
maching center bed HT300
Features:
1) aperture:13
2) Height:43
3) Power:AC 12VA, DC 10W
Hon tips bostaurus: Cut horns of zebu
Malagasy beans
All raw materials: Leather, stones, horns, raphia...
Malagasy handicrafts.
Centrifugal Pump in PVDF Construction from 2m³/Hr to 200m³/Hr with head upto 60m. All PVDF pumps are used for corrosive chemicals temp. upto 120 deg C.
dexktop engraving/machine and freestanding engraving/machine as shown in the attached
photos i wish to buy a good quality machine at a low price to be sent to the
UK.
drain pipe,hydrant,flange
1 2 3 4 5 Next...
Total: 90 items in 5 pages.
