Fishmeal Machinery RMU-60
In order to make the boiling of fish raw material better bunker with screw conveyer (which is heated by steam condensate) and boiler with thin layer of raw material boiling are installed in RMU 60.
Instead of rotor disk dryer rotor tube dryer is used with the system of heated air discharge under pressure, it helps to get fodder meal of better quality and it also reduces manufacturing cost of the product.
Small fish or other fish waste is dumped directly in the bunker; big fish passes to the bunker through the chopper. Bunker is heated by steam condensate. Raw material layer in the bunker is controlled automatically. Fish from the bunker is served by screw conveyer into a boiler. In the boiler raw material is boiled, mixed and then it goes farther. Soft boiled mash passes from the boiler into the two-screwed press which separates liquor and oil. The extracted fractions are sent by pumping unit into a slime exudation unit (residue separator). Suspended fractions extracted in the residue separator are served by the screw conveyer into a dryer. Pressed mash from the press passes into the dryer of rotor-tube type. Drying is made by contact of the mash with the body and tube shaft heated by steam. Moisture evaporates and is removed by air coming through the dryer. The air from the dryer comes to the cyclone separator where the meal is extracted from it. The dried meal passes to the magnetic device which catches metal impurities. From the magnetic device the meal is drawn into the milling machine where it is crushed and then it passes into the first centrifugal unloader. Then the meal passes to the pneumatic transfer where it is cooled and through the second centrifugal unloader and a sluice gate is taken to the packing place.
The purified liquor is transported from the residue separator to the first tank compartment where it is heated to t 90...95 degrees C and goes further to the separator which cleans and separates oil from the clarified liquor.
Separated oil is served by pumping unit into the ship tank. Defatted liquor from the separator is poured out of the boat.
We produce equipment for processing shrimps.
Our equipment qualitative and with the best price!
We shall answer all your questions with pleasure!
Sales Terms & Specifications:
|Price Terms||FOB / CIF / EXW(Factory Price)|
|Terms Of Payment||T/T, Western Union, PayPal, L/C at sight|
We are joint venture factory who produce the whole plant fishmeal for 30-80mts / day with good quality
The PAS AR12 short Diffuser has many advantages over traditional Airstones used in Fishfarms. - Less Expense - More Durable - W
Shore type, diesel engine driven for 6hp/8hp/10hp with 12pcs/15pcs/17pcs impeller. Please contact us for more information. All
HDPE (high density polyethylene) monofilation yarn for knitting shade net The shade net are used in greenhouses for shading hort
We produce twist and braided lead rope, it is easy used in complete netting.
We are manufaturer & suppliers of different capacity oil mill machinery line like as oil expellers, flaking mill, enhancer press
Specification Cotton Twine: 3ply - 120ply made of 10S or 20S yarns Cotton Cord: DIA. 1.5mm - 20.0mm Packing Cotton Twine: In 4"
Nylon monofilament fishing nets Material: PA Knot: Double knots Thickness: 0. 10mm-6.00mm (190D/2PLY to 210D/60PLY), 0.08mm-6mm
Specifications: We have many types of shade net. We can do it by your sample. In case you need more information about our produc
Specifications: 1) Square: 1.50mm x 1.50mm - 4.50mm x 4.50mm 2) Round: Dia. 1.00mm X 3.00mm Packing: In hanks: 20-200m, each In
Frame sizes: 1) 66 x 47 x 22cm 2) 70 x 50 x 32cm 3) 95 x 63 x 50cm Knotted mesh sizes: 10, 12 & 16mm
steel silo which we produced for poland client.It have been completed this spring.