Elm327 USB

ELM327 USB is the latest PC-based scan tool. It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327 USB. The output protocol (connection to laptop) is USB.
Processor: ELM327 USB
OBD-II Protocols:
ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
J1850 VPW
J1850 PWM
Output protocol: RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD Tx / Rx, RS232 Tx / Rx, Power
Operating voltage: 12V, internal protection from short circuits / overvoltages
Nominal idle current: 45 mA
OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms-DOS and Windows.
The program lets you perform the following operations:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database) .
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages / associated short term fuel trims
Fuel System status
Fuel Pressure
Many others. . .
Upcoming Features:
Data graphing and logging
Freeze Frame data
Continuous and Non-Continuous Oxygen Sensor test results
Free software:
Scantool. NET
GM Mode 22 Scan Tool by Terry
OBD Gauge for PalmOS and Pocket PC by Dana Peters
OBD Logger by Jonathan Senkerik
OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3. 52-local copy)
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
PyOBD by Donour Sizemore for MacOSX and Linux
RDDTC by Pete Calinski
Real Scan by Brent Harris
ScanTest for Pocket PC by Ivan Ganev aka a-ser

Sales Terms & Specifications:

Model No.ELM327 USB
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, Western Union, PayPal, L/C at sight
send enquiry to this suppliers

Relative Products


ProgrammerKEY PROGRAMMER Use for key programming. More cars than any other transponder machine. Package contains KEY PROGRAMMER Use for k

Service Ladder

Service LadderFeatures: 1) Specification: 2,017 x 57 2) Performance: suitable for climbing up 3) Material: four corner iron

Air Motorcycle Lift

Air Motorcycle LiftModel: lt0204-1000a air motorcycle liftCapacity: 1000lbMin. Height: 185mmMax. Height: 824mmPlatform size: 2000x610mmLeading plat

OPS + DIS + Sss / Most

OPS + DIS + Sss / MostOPS is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-

Air pressure tester(for auto use only)

Air pressure tester(for auto use only)item_no.:: 851503ITEM NO.:851503Air pressure tester(for auto use only) Range:10-50pciScales selection:bar,kpa,kg/cm2,psiPAC

Rubber Scraper

Rubber ScraperFor cleaning the inner liners For both juncture and section repair prior to buffer Removes mounting lubricants and silicones f

valve cap

valve capValve Extensions provide a seal against contaminants while extending the valve mouthfor convenient access. *Packing: Bulk * Mo

Wheel Aligner

Wheel AlignerWheel Aligner is designed to measure the wheel alignment parameters and to compare them with the specifications provided by vehi

Oil Filter Wrench

Oil Filter WrenchOil Filter Wrench:Item NO.: ST04Material: carbon steelSize: Max 95mmSurface treatment: chrome plated Function: use for car oil f

Flexible Shaft-90cm Long

Flexible Shaft-90cm Long      FLEXIBLE SHAFT-90CM LONG *With 6mm keyless chuck. *With 4mm square shank and fits  an

Tack Lifter

Tack LifterBright polished good quality steel claw blade with curved leverage end and plastic handle.

Two Post Lift CRL-6350

Two Post Lift CRL-63503.5ton_two_post_lift: DOUBLE FIXUP two post liftLifting Capacity:3500kgLifting Height:1800mmLifting Time:50sTotal Height:2800mmT