ELM327

ELM327What Is This Multi-Protocol Interface? The Controller Area Network (CAN) has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. Shown in Figure 1, this interface is designed to act as a bridge between those On-Board Diagnostics (OBD) ports and standard RS232 PC ports. It uses ELM327 IC chip which builds on improved versions of the proven ELM320, ELM 322, and ELM 323 OBD interfaces by adding four CAN protocols to them. The IC chip can automatically sense and convert the nine most common protocols in use today, which makes such an interface capable of working with almost all vehicles. Here are some key characteristics and improvements offered by this interface and ELM327 chip: An interface set of a direct plug-in device and a serial cable configuration for convenience. When plugged in the direct uses, it requires PC with 9-pin serial port. In serial port connectivity, it is able to be converted for USB connection if needed. Slim design on the OBD-II plug-in end allows the maximum vehicle fit-ability by the interface. Supports J1850 VPW and PWM, ISO 9141-2, ISO 14230-4 as well as ISO 15765-4 (CAN-bus). Supports J1939 (CAN-bus) through software switch setting. Auto protocol search. Uses the same simple ASCII command interface. RS232 pins? Polarities are compatible with standard COM interface IC. Internal EEPROM can remember the last protocol. Voltage input monitors your vehicle battery. Low power CMOS design. What Exactly Can You Do with This Multi-Protocol Interface and the Software? With ScanTool. Net v1.10, this interface can work with all vehicles regardless of their makes as long as they are newer than model year 1996 in the US. As a typical example, it lets you perform the following operatiRead diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light) Display current sensor data, including: Engine RPMCalculated Load Value Coolant TemperatureFuel System Status Vehicle SpeedShort Term Fuel Trim Long Term Fuel Trim Intake Manifold Pressure Timing Advance Intake Air Temperature Air Flow Rate Absolute Throttle Position Oxygen sensor voltages/associated short term fuel trims Fuel System status Fuel Pressure Many others...

Sales Terms & Specifications:

Model No.ELM327
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, Western Union, PayPal, L/C at sight
send enquiry to this suppliers

Relative Products

25pc/canister auto wipes-pass CE declaration

25pc/canister auto wipes-pass CE declaration25pc/canister interior car wipes,material: spunlaceweight: 40g/m2cloth size: 15x10cmpacking: 72canister/carton/ 48.5x33x40c

Double Deck Small Scissor Lift Rack

Double Deck Small Scissor Lift RackFeatures: 1) Hidden flat-plate structure, good rigidity and synchronism and high measurement precision. 2) Under-ground mounti

Programmer

ProgrammerX-431 X431 X-431 LAUNCH X431 TOP LAUNCH X-431 INFINITE LAUNCH X431 SCANNER

Tire Service Lift

Tire Service LiftFeatures: 1) Lifting capacity: 3,000kg 2) Lifting height: 580mm 3) Min. height: 80mm 4) Net weight: 400kg 5) Overall size: 2,100

Low Profile Quick Lift Jacks

Low Profile Quick Lift JacksModel LYD 2 Features: 1) Capacity: 2T 2) Low position reaches 90mm 3) With over-length lift arm and suitable for lifting low po

oil pumping

oil pumpingContain 90L Net weight 30kg grossWeight 40kg Dimension 400*400*1300mm Work pressure 0.1-0.8mpa

Diagnostic OBD II

Diagnostic OBD IIThe first generation of On-Board Diagnostics (called OBD I) was developed by the California Air Resources Board (ARB) and implem

Camshaft Repair Kits

Camshaft Repair KitsOur company supplies camshaft hardware kits for the North American and European market. 95% of our parts are produced for North

Two-Helper-Arm Tire Changer

Two-Helper-Arm Tire ChangerFeatures: 1) Rim clamping from outside: 14" - 24" 2) Bead-remover cylinder (force at 10bar): 2,500kg 3) Rim clamping from inside

Morse Protectant

Morse ProtectantWe are manufacturers and exporters of protectant and other car care products.We also have office in Dubai.You can send us your e

Detail Plus Ads1000

Detail Plus Ads1000The State of the art auot exterior polishing machine and interior apholstery cleaning this detail plus machine it is a compleat

Hydraulic Floor Jack

Hydraulic Floor JackSpecifications: 1) Capacity: 3.5T 2) Min. height: 135mm 5) Max. height: 495mm 7) N.W.: 38kg 8) G.W.: 40kg Inner packing: C