Big Bus Spray Booth

1) Booth design:
a) Booth panel wall thickness: 75mm
b) The panels are made of steel and plastic. The parts have injected fillings
of heat insulation foam materials in the middle section, which provides
better heat retention and sound proofing ability
c) The booth ceiling panels are made of rigid folded electro-galvanized
steel plates frame. All the panel joints are lined with aluminum strips
which provide better sealing
2) The booth front entrance has three doors (foldable) and one safety
exit / service door at the side. All doors are made by bending methods
and the middle sections are reinforced with 1.5mm thick steel plates frame.
During installation, M8 bolts and nuts are needed to fix-up. The sight glass
has oblong shape
3) Air intake system (2 sets): it has one unit (15" x 15") rotary fan couple with
a 7.5kW motor drive unit. The heat exchanger is made of stainless material,
which has thickness of 1.5mm and features more heat dissipating surface,
better heat exchange and better burner efficiency. The burner is an Italian
made brand "RIELLO" model 40-G10 and the air valve uses "BELIMO"
electronic control unit
4) Air exhausts system (2 sets): consists of 2 filters and one unit (15" x 15") rotary
fan couple with 7.5kW motor drive unit
5) To meet the Environment Protection Agency requirements, the followings
will be used:
a) Activated carbon filter system, which will provide better filtering of
harmful exhaust gas from burner and gases from paint solvents that
meets the EPA standards
b) Water filter system, which will effectively remove air borne paint and
c) With the combination of the two systems incorporated, the discharged
air will meets the national EPA standard
6) Lighting system: at both (left and right) corners of the booth ceiling,
there are 18 sets of 45 degree mounted lightings. Each set consist of 3
pieces of 40W lamps. At the middle section of booth (left and right) side
panels, there are 12 sets of lightings. Each set consist of 2 pieces of 40W
lamps. Finally, at the mid-section of the rear end of the booth, it has 3 sets
of super bright lights
7) Ceiling filter system: it has wool type filters which filter out 99% dust,
which ensures that the air entering the booth interior is virtually dust free.
The filter frames precisely fabricated to ensure better sealing and easy filter
8) Booth flooring system: it consists of 2 rows of extra heavy duty steel grid
covers and below it lay the filters which filters the out going air that exhaust
out to the exhaust fan
9) Control system: auto temperature control and auto-shut off after completion
10) Spray lift platform system (2 sets): easy to spray and operate

1) External dimensions: (L) 15,150 x (W) 6,900 x (H) 5,400mm
2) Interior dimensions: (L) 15,000 x (W) 5,000 x (H) 4,800mm
3) Vehicle entrance dimensions: (W) 4,000 x (H) 4,800mm
4) Blower capacity: 40,000 + 40,000m³/h
5) Booth interior air speed: 0.4m/s
6) Operating temperature: 60 ~ 80oC
7) Diesel fuel consumption: 25 ~ 30L/h
8) Raising temperature: 5 ~ 15oC
9) Power consumption: 30kW
10) Noise level:

Sales Terms & Specifications:

Model No.BD1530-15150
Place Of OriginChina
Brand NameBYDE
CertificationISO9001, CE
Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, L/C
Supply Ability50pcs/month
Delivery Lead Time15 days
send enquiry to this suppliers

Relative Products

Auto Parts

Auto PartsWe can supply a wide range of specifications.

Automatic Tyre Inflator

Automatic Tyre Inflator1) Digital Display of desired and actual pressure 2)Increase/Decrease key on front panel for setting pressure 3)Auto cut off on

Hydraulic Forklift Jack

Hydraulic Forklift JackFeatures: 1) Compact structure and convenient operation 2) A versatile jack has a high enough profile as normal jacks and a low

Motor Cycle Lifter

Motor Cycle LifterOur product as following; 1. Hyd. Handing equipment as hand pallet truck, stacker, hyd. Drum carrier truck, hyd. Drum lift, x-l

auto lift,post lift,hydraulic lift,car lift,parking lift

auto lift,post lift,hydraulic lift,car lift,parking liftTPO310AC: Features: 1) True asymmetrical design 2) 30 degree rotated columns 3) Maximum door opening for improved access 4)

transmission jack

transmission jackTRANSMISSION JACK ranted load(TON):0.5 MIN. height(mm):853-1300 MAX. height(mm):1340-1970 SHOP CRANE capacity(TON):0.5-2 lifting

8T Hydraulic Bottle Jack

8T Hydraulic Bottle JackSpecifications:1) Capacity: 8T2) Min. height: 200mm3) Lifting height: 125mm4) Adjusting height: 70mm Packing:4pcs/ctnPackage siz

Car Eagle A800

Car Eagle A800Eagle OBD-A800 Car Eagle OBD-A800 Main Features: 1. Read VW / Audi Generic and Manufacturer specific Diagnostic Trouble Codes.

Car Wash System

Car Wash System1.Scrubbing Brush for cleaning tires,wheels,grills,convertible tops and other non-paintedsurfaces.2.Rotating Soft Brushless Clot

Car Wash Kit

Car Wash KitFeatures: 1) Fitted plastic storage 2) Dust brush 3) Wash mitt 4) Combination sponge 5) Cleaning / drying cloth 6) 16" extensi

3.5 T Scissor lift (Stand Out)

3.5 T Scissor lift (Stand Out)3.5 T Scissor lift (Stand Out) - Minimum installation space required - Separate control box - High-quality multi-level el

Tire Changer

Tire ChangerSpecifications: 1) Fully automatic 2) Suitable for handling 10"-22" wheels and capable of handling 20" aluminum alloy ri