Auto Production Line Equipment
Since enough memory space has been reserved in ECU (Electronic Control Unit) , so we can make a chip-turning based on car ECU, because the ECU contains the software that controls the fuel delivery and ignition timing. Chip-Tuning can optimize or rewrite these programs in the computer, and this changes the fuel delivery maps and boost pressure of the turbocharger.
REVO has widely developed a set of applications for most modern cars, including Non turbos, Turbos and Turbo diesels. As a result, it makes engine run more efficiently, likewise REVO has increased horsepower and torque figures. Most Chip-Turned cars will achieve up to a 20 to30 percent increase in horsepower and a remarkably stronger torque, even some are higher than 30percent. After chip-turning in cars, the acceleration and final speed is recognizably improved along with less fuel consumption, if same driving conditions are assumed. Overall the engine is more vital and powerful. In the control unit are also maps programmed to direct the fuel injection depending upon load and engine speed, and those provide a better solution for the car's reserved and unsettled troubleshootings, which doesn't affect other functions or original settings at all.
The advantages of REVO are as follows:
1. To chip the car with REVO will achieve up to a 20 to30 percent increase in horsepower and a remarkably stronger torque, even some are higher than 30percent After chip-turning in cars, the acceleration and final speed is recognizably improved along with less fuel consumption, if same driving conditions are assumed. It makes the car much more better in power and torque.
2. There's no any influence on the settings of the functions of cars after fitting a REVO. For any particular car, REVO can re-programme the information held on the computer's chip to optimize and improve power output without compromising fuel economy.
3. Revo can be used everlastingly, which can provide timely protection. Unless the outside force, REVO can keep well in spite the ECU has damaged. It can be used continuously, furthermore it still provides the process of protection. It can be updated via softwares, you can continue to use the chip avoiding wasting.
4. Revo Is All About Enhancing the Driving Experience! If it doesn't make your vehicle perform better, stop quicker, turn flatter, and more fun, we don't have it. Our engineering and R / D departments take great pride in developing proprietary systems and software that allow total control over all aspects of vehicle tuning and drivability factors.
5. There's a flourished and promising market for chip-turnings. With the development of auto technology, especially the technical ability of ECU, the routine model of ECU programs will not satisfy the exact requirements of car users, even more auto manufactures will choose REVO as their optional chip-turning projects.
6. Revo provides the users best warranty and customer service wherever you are! Revo makes you enjoy your driving much.
Revo performance software is programmed through the vehicles Serial Port. This allows us to reprogram you're vehicle without lifting the bonnet, and will be downloaded into your factory ECU in just over 10 minutes!
Revo-Innovators of trial software to the aftermarket.
Sales Terms & Specifications:
|Price Terms||FOB / CIF / EXW(Factory Price)|
|Terms Of Payment||T/T, Western Union, PayPal, L/C at sight|
We are offering the following used components of an production line for car license plates (Euro-size 520 x 110 x 1 mm): a) Dec
Feature: 1.Power: 220V 50Hz 2.consumption of upper motor: 90W 3.consumption of lower motor: 60W 4.heating pipe: 500WX4 5.stampin
Car roof bars Material: aluminum, plastic, iron Length: 1,300mm, 1,270mm, 1,200mm Outer packing: 1pc/mini carton, 4 mini carto
Nishotech will provide a fully engineered UF system for CED bath application & produce consistently a minimum of 500 LPH / M
SPECIFICATION Spindle Travel 6-7 / 8" / 175mm Spindle Speed 70, 80, 118 RPM Spindle Feed Speed Min 0. 002 Inch Per Revolution /
Ammco 40630 Positive Rake Round Toolholder Set All Toolholders Are Supplied with Carbide Inserts To Be Used With CI 40610 & CI 1
We have the pleasure in enclosing information about AGTM Glass Machinery Co. As one of leading company in Glass machinery and eq
PC-based machine control system, WinPromate II substitutes the traditional CNC and PLC, and has the functions of powerful CADCAM
Usage This is the special equipment for producing the dirt-block off plate of the bicycle. Itis arranged in one line to finish
Neeraj enterprises, specialized in the field of motorcycle, bicycle wheel rim manufacturing plant machinery. We are manufacturin
This machine is used for testing the radial fatigue strength of any wheel or rolling strength of a tyre.
Electrophoresis production line has a characteristic of high utilization rate, safe production, few environmental pollution, hit