2007 R1 Motorcycle

Infiltration"G.E.N.I.C.H." concept developed by motorcycle, participating motogp M1factory cars and YZF-R6 are equipped with the Volvo-T (Yamaha ChipControlled Throttle) electronic throttle, and in 07 YZF-R1 first usedmold - I (Yamaha Chip Controlled Intake) chip control intake system,the use of servo motors to change the length of the trip.Iwill mold-engine business at the low to make a longer trip Inlet toupgrade Inlet inertia, and the engine to high, then reduce the intakeinlet itinerary reduce inertia, resulting in several different underable to create the best gas flow, improve performance and drivingpleasure of high-tech equipment.

07 R1 with a new engine and chassis methotrexate and brown lines. Although the new bore and stroke engine data and R1 06 77 x 53.6mm are the same, but all other details have changed.Apart from titanium wow mediator feet and the new water tanks, the mosttalked about is the R1 sensitivities to abandon the past three to twoengine valve settings, but only to traditional two-two of the fourvalve engine.But the combustion chamber to increase the compression ratio of 12.7:1,equipped with T-S40 and S40 - electronic throttle control chip I IntakeSystem: The non-ram-air all of the 180ps/12, 500rpm astonishinghorsepower and output are more linear, more broad torque distribution ,the new R1 on the road also very good play. 5ps. It increased the horsepower output 10ms.

R1 Delta Box Frame is a new design, by the casting of aluminum alloy and high-tension produced rigid better balance.  New aluminum tail quintals of torsion of a 30% increase, but a slight decrease side. R1 design direction is to enhance the attack bending performance.The first shock absorber 14% compression performance gains have reducedfork in the fork tube oil bubble may flow back and forth . Mei shock absorber damping adjustment for the high and low speed into an independent set. 07 R1 used to hide radioactive six abalone, the first disc diameter from 320mm to 310mm.



Sales Terms & Specifications:

Price TermsFOB / CIF / EXW(Factory Price)
Terms Of PaymentT/T, Western Union, PayPal, L/C at sight
send enquiry to this suppliers

Relative Products

Motorcycle

MotorcycleMain technical specifications: Displacement (ml): 124 Engine type: single cylinder, air cooled, four-stroke Max. loading cap

Snowmobile

SnowmobileFeatures: 1) Standard track with slider 2) Four stroke engine: 160cc 3) Front and rear suspension 4) Tether cord 5) Lightweight

Pocket Bike 110cc 4 strokes

Pocket Bike 110cc 4 strokesSpecifications: 1) Engine: 50cc, 110cc single-cylinder, 4-stroke, air-cooled, infinitely variable speeds 2) Max. Speed: >70kms

Motorcycles

MotorcyclesFeatures: 1) Max. speed: 90km/h 2) Engine type: 1-cylinder, air-cooled, 4-stroke 3) Displacement: 124cc 4) Max. power: 9.0km/7,

Disabled Cargo Tricycle

Disabled Cargo TricycleSpecifications: 1) Dimensions (L x W x H): 2,450mm x 9,100mm x 1,090mm 2) Type of engine: single-cylinder, 4-stroke, air cooled

Motorcycle

MotorcycleModel Number YY50QT-6D Length: (mm) 1730 Width:(mm)

Vespa Acma Type 1964 Vbb 150.

Vespa Acma Type 1964 Vbb 150.Unusual acma type with headlight on front guard and wide body something different many photos this is only the second one we hav

Tuk Tuk

Tuk TukThe Tuk Tuk (SF) or pick up dump has more capacity and powerful to carry construction materials or agriculture products. This mo

1976 Other Makes : STRADA

1976   Other Makes : STRADAVehicle Description A MODERN CLASSIC. Italian Pushrod Vtwin European Styling. Vehicle Condition Rebuilt top ends.

BMW R Series R1150gs ( 2003 )

BMW R Series R1150gs ( 2003 )If you want to have a dreaming motorcycle and will take you around town or around the world!! I have your choice!! This is a BMW

150cc Dirt Bike

150cc Dirt BikeFeatures: 1) Max. load: 150kg 2) Max. speed: 130km/h 3) Engine: 150 / 200cc, single cylinder, 4 stroke, forced air cooling 4) Bo

MOTORCYCLE

MOTORCYCLE(50cc, 70cc, 90cc, 110cc available) Detailed product description: 1) Engine type: single-cylinder, air-cooling, four-stroke 2) D